U Screw Conveyor | Yemtar

TRUCK DUMPER

SILOS

FARM TYPE SILO

ROUND SILO

FLAT BOTTOM STORAGE SILOS

SQUARE SILOS

DOSING

DOSING SCALE

OIL DOSING SCALE

MICRO DOSING

MACRO DOSING

DUST FILTERING

INTAKE FILTER

HAMMER MILL FILTER

SPOT FILTER

JET FILTER

CYCLONE

AIR LOCK

GRINDING

HAMMER MILL FEEDER

HAMMER MILL

ROLLER MILL

CRUMBLER

PREMIX

ROUND PREMIX UNIT

RECTANGULAR PREMIX UNIT

MIXING

DOUBLE SHAFT MIXER

SINGLE SHAFT MIXER

RIBBON MIXER

MOLASES MIXER

MOLASSES MIXER

DOUBLE SHAFT MOLASSES MIXER

EXTRUSION

CONTROL AUTOMATION

SPARE PARTS

HAMMER MILL BEATER

HAMMER MILL SCREENER

ROLLER SHELL

DIE

COUPLING

CHAIN CONVEYOR SPARES

ELEVATOR BELT

FLAKING

FLAKER

DRYER AND COOLER

STEAM CHEST

MANURE HANDLING

FERTILIZER MIXER

MANURE DRIER

U SCREW CONVEYOR

U Screw Conveyor

Working Principle

Spiral; It is the carrier that enables the transportation of raw materials and products horizontally, at an angle and vertically in facilities such as feed, food, chemistry and fertilizers. It carries out the transport by rotating the rotor of the leaves, which are helically arranged on the steel draft tube.

Features

  • Coupling or chain gear system is used as the powertrain.
  • The thickness of the helix leaves varies according to the purpose of use.
  • Rotor pipe is made of thick-walled steel drawn pipe.
  • The bearing drive side is made with a special cast iron bed. Two tapered roller bearings are used.
  • The rotor is suspended with an intermediate bearing in order to prevent sagging, vibration and wear during long augers.
  • They are used for the transportation of small grained and adhesive surface products.

Options

  • It can be made of black sheet or stainless materials.
  • Sheet thicknesses can be changed upon request.
  • The lap counter can be installed.

Spare Parts

  • Bearings and Housing
  • Sprockets
  • Belts and Pulleys
  • Leaf and Rotors

Advantages

  • Ease of maintenance and cleaning
  • Less energy consumption

Working Safety

  • Low voltage directive 2014/35 / EU
  • Machine directive 2006/42 / EC
  • Electromagnetic compatibility directive 2014/30 / EU
  • Related Harmonized Standards: EN12100 - 1, EN12100 - 2, EN 14121-1, EN 287-1, EN 60204-1, EN 61000, EN 55011